T100 - Pompy popowodziowe

Large floating water pump

Large floating water pump

Manufacturer: Łukomet
Model: T141, OSA150
product Description

Destiny
Large floating water pump T141 - The ŁUKOMET medusa is designed for pumping technologically clean water. It is most often used for pumping down flooded areas, pumping ponds, emergency drainage of depression areas, etc. The pumping station, due to the parameters it achieves, is particularly useful for pumping water with great efficiency from large-area floodplains, for several dozen meters distance and several meters height eg through a flood embankment.
The pumping station is launched directly into the flooded area.

Construction and principle of operation
In the tub of stainless steel there is a gasoline engine KG690DE activated by an electric starter and coupled with a propeller single-stage horizontal pump OSA150. Wheels at the front of the pump facilitate its launching, provide buoyancy and prevent suction of bottom silt. Above the inlet of the pump, an anti-cavitation plate is installed to prevent air suction when working in very shallow water. On the back of the pump there are two discharge outlets with a diameter of 200 mm, on which two (flat) hoses are put on (for quick coupling devices). The whole is transported even behind a passenger car on a small trailer or on a pick-up or delivery truck.
The high efficiency pump sucks water in front of you and under the bottom of the tub and pushes backwards towards the land with two Ø 200 mm hoses. Floatability of hoses is provided by eyeglass polyurethane floats. The pumping station allows to obtain a capacity of 540 m3 / h at a lifting of 5 m. The hydrator must be used to operate the pump.

Technical data
Warehouse dimensions: 1400 x 860 x 600 mm Delivery hoses fi 200 mm 2 x 25 m
Weight without pressure hoses: 120 kg Hose weight 2 x 50 kg
Engine GX630 V2 4-stroke 688 cm3 Pump capacity 480 m3 / h
N = 14 kW at n = 3600 rpm
Electric starter 12 V battery 30 Ah
Bilge pump 12V Q = 30 l / min automatic
Lifting height 4 m
 The minimum water depth is 0.3 m


The pumping station has the CNBOP approval

parameters
Podstawowe
Wydajność [m3/h]:480
Wysokość podnoszenia [m]:4
Video
Polish production after-flood pump.
Files
Pliki do pobrania:

Kontakt

Zapraszamy do zapoznania się z ofertą firmy Łukomet.